5 EU Declaration of Conformity for YS-7

EU Declaration of Conformity

No.2019-YS-7

(1)       YS-7 the industrial helmet is for general use in industry to intended primarily to provide protection to the wearer against falling objects and consequential brain injury and skull fracture

(2)       Manufacturer: KANGHUA SAFETY EQUIPMENT MANUFACTURING CO.,LTD Dianhouzhou Village, Zhuge Town, Lanxi City, Zhejiang, China

(3)       The sole responsibility for issuing this Declaration of Conformity lies with the manufacturer: KANGHUA SAFETY EQUIPMENT MANUFACTURING CO.,LTD , see 2

(4)       Subject matter of the declaration:

This helmet is designed to provide limited head protection by reducing the force of small falling objects striking or penetrating the top of the shell. It was not designed to provide front, side, or rear impact or penetration protection, while it may protect against light bumps to these areas.

Avoid contact of these devices with electrical wires, very low temperature (-20 ℃ or -30 ℃ and very high temperature (+150℃)

WARNING: when a helmet has been subjected to a blow or knock, it might not show any signs of damage, and helmets subjected to blows must be replaced.

Marking

 

(5)       The industrial helmet (W-003)  in 4 complies with the essential health and safety requirements of Annex 2 of the PPE Regulation (EU) 2016/425 and the General Product Safety Directive 2001/95/EC.

(6)       Used harmonized standards and technical rules: EN 397:2012+A1:2012 

(7)       INSPEC (0194) Laboratory has carried out the EU type examination (module B). Test Report 2.16.01.02 and EU-Type Examination Certificate N°2754/2347/158/02/19/1055 were issued by the notified body ALIENOR CERTIFICATION ZA DU SANITAL 21 RUE ALBERT EINSTEIN 86100 CHATELLERAULT France – N°2754 on Feb.05, 2019

Signed for and on behalf of 

KANGHUA SAFETY EQUIPMENT MANUFACTURING CO.,LTD 

Dianhouzhou Village,

Zhuge Town, Lanxi City,

Zhejiang, China

Lanxi  on  Feb. 05, 2019

Mr. Xiayu

General Manager